New I/O Cards allow Cascading Card Cages and Ethernet Pass-Thru
Aurora introduces three new I/O cards with HDMI Loop-Thru, Ethernet Pass-Thru and DVI Seamless Switching at GovComm 2013
Aurora’s DXCI-4-LHDMI-G2 Input Card adds HDMI Loop-Thru connections allowing cascading of card cages. Up to three cages can be cascaded creating configurations up to 96 Output Channels and 32 Inputs. With three different Card Cages, expansion over 32 channels can be achieved in up to two additional blocks of 8, 16 or 32 channels.
The new DXCI/O-4-HDBT2E-G2 cards add Ethernet Pass-Thru to the HDBaseT Input and Output Cards. These cards extend HDMI 60Hz to 600ft with Ethernet to the DXE-CAT-RX2 receiver modules or DXW-2E Tx Wall Plates. The DXE HDBaseT Receivers and DXW-2 Wall Plates can be powered directly from the Card Cage not requiring external power supplies or PoE. Of course external power supplies and PoE can be used if desired allowing for the industries most flexible powering options.
Aurora’s DXCO-4-SDVI-G2 output card allows for 4-channels of seamless DVI switching per card. These cards are perfect for Video Conference applications and any circumstances where switching speed and frame accuracy is required.
V-Tune Pro HD: Combining a standard multi-format Tuner with IPTV streaming media
Aurora’sV-Tune Pro HD is the perfect solution for all your Tuner needs. Like a traditional tuner, the V-Tune Pro HD supports RF tuning of NTSC, ATSC and QAM signals. In addition, the V-Tune Pro HD also gives you the ability to receive IPTV streams directly to individual channels of your choice.
With the V-Tune Pro HD you can receive H.264, MPEG2 and MPEG4 streams directly to any channels allowing the perfect mix of traditional QAM service and digital signage/streaming media accessed with the ease of simply changing the channel.