The DXE-FIBR-S3 DVI fiber module can transfer digital video and clock signal up to 1500m by 2-core single mode optical fiber and 500m by 2-core multi-mode optical fiber at 1920*1200@60Hz resolution.

The transmitter (DXE-FIBR-TX3) has the ability of auto EDID. It can store the EDID from the monitor to make itself adapt to monitors with different resolutions increasing the reliability and simplicity of an install.

  • DVI1.0 (non-HDCP) with virtual DDC & support for DDC2B
  • Optical fiber connection via 2-core multimode or single mode optical LC fiber
  • Supports up to 1080p 60Hz resolution
  • Wide frequency range: 25MHz~165MHz
  • 1500m (4921’) single mode / 500m (1640’) multi-mode
  • Auto EDID programming feature
Video Input / Output (TX/RX) DVI 1.0 Single Channel
Input Signal (TX) 0.5 – 1.0V P-P
Input DDC Signal 5V P-P (TTL)
Insert Loss 0.2dB
Video support Up to 1080p 60Hz
Bandwidth 165Mhz
Fiber Modes Single 1500m / Multi 500m
Fiber Connector Dual LC
HDCP Not Supported
Housing Metal enclosure
Dimensions [L x W x H] 70 x 39 x 15mm [2.76" x 1.54" x .59"]
Weight 30g [1.02 oz]
Power supply 5V 2A DC
Power consumption 2 Watts [max]