With only one cost effective Cat-5/5e/6 cable, the AS-CAT1-VGA lets you extend VGA (at WUXGA) or 720p component video, bi-directional IR control and half-duplex serial RS-232 at the same up to 1,000ft (330m). The AS-CAT1-VGA comes as a set of a transmitter and a receiver. The transmitting unit AS-CAT1-VGA-TX is installed near the signal source, and the receiving unit AS-CAT1-VGA-RX is placed near the desired VGA display. With the built-in equalization and signal gain control, the transmission path can be adjusted to adapt the cable quality and video bandwidth. Furthermore, the VGA RGB delay control [de-skew] function provides the compensation in arrival time among red, green and blue signal channels due to long transmission via normal Cat-5/5e/6 cable. With a commonly obtainable VGA-component breakout cable connected to the VGA port, the extender can support the component video for 1,000ft (330m) as well.

  • Supports up to WUXGA [1920x1200@60] or UXGA [1600x1200@60] to 1,000ft (330m)
  • Supports 720p component video signal to 1,000ft (330m)
  • Supports RS-232 half-duplex & bi-directional IR pass-through
  • Supports analog stereo audio and digital S/PDIF stereo audio
  • Video and audio local out on transmitting unit for easy monitoring
  • Adjustable equalization and gain control on receiving unit for signal tuning
  • De-skew compensation for RGB delay control
  • Wall mounting case & interlocked power jack
Video Bandwidth 350MHz
Video Support VESA
Transmission Distance WUXGA [1920x1200] / 720p - 1,000ft (330m) [CAT5e]
Support Stereo
TX Connectors (1) VGA in, (3) 3.5mm, (1) RJ-45 out, (1) 3.5mm out
RX Connectors (1) RJ-45 in, (1) VGA out, (3) 3.5mm out
Dimensions 4.8" x 3.5" x 1.5" [123 x 91 x 36mm]
Weight 0.88lbs [0.395kg]
Mounting Wall-mounting case with screws
Power Supply 5V 2A DC (included)
Power Consumption 6Watts (max)
Operation Temperature 32~104°F [0~40°C]
Storage Temperature -4~140°F [-20~60°C]
Relative Humidity 20~90% RH [no condensation]