IPBaseT VLX-TCW2HThe VLX-TC1-C Series provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one. It is the industry’s first 4K UHD transceiver with only 1.5 frame (25ms) latency and visually lossless compression. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The VLX-TC1-C Series can be set up as either one to make installation, inventory, and troubleshooting easier.

Note: The selected network switch needs to support:  1Gbps, Non-blocking IGMP & Jumbo Frame Packets. The raw network cabling as well as the patch cables are as important as the switch. When using copper, CAT5e, 6, or 6a cable is preferred for optimal performance and is important to follow the standard rules for running Ethernet cables. No sharp bends, coiling, putting near power lines, grouping tightly together with other LAN cables, etc. Shielding is not necessary but can be used for noisy environments.

NOTE: The VLX-TC1-CF is the latest hardware revision which adds SFP module support.

  • 4K visually lossless over 1Gbps network
  • Low 1.5 frame latency
  • 1080p to 4K, 4K to 1080p scaling
  • HDMI® 2.0/HDCP 2.2
  • Secure Content Encryption
  • Unlimited scalability (based on network topology)
  • Videowall with image rotation
  • PoE (Power over Ethernet)
  • Stereo line I/O
  • RS-232 and IR Control Ports
  • Auto sense switching
  • USB 2.0 Host and Device Ports
  • Dante® IP audio option
Compression 8:1
Latency 1.5 Frames (25ms)
Scaling 1080p to 4K, 4K to 1080p
HDMI Inputs 2 (HDMI 2.0, HDCP2.2)
HDMI Outputs 1 (HDMI 2.0, HDCP2.2)
Audio Analog Stereo Line In/Out (3.5mm TRS)
1G Copper Ethernet RJ-45
LAN RJ-45 10/100/1000M PoE (PSE)
Video Bandwidth 340MHz
Video support Up to 4K2K 4:2:0 @60Hz
Audio support Up to 32 channels & Break-away Capable
RS-232 Up to 115k Baud (3.5mm TRS)
IR Bi-Directional (3.5mm TRS)
USB Connector 1 USB 2.0 Type A, 1 USB 2.0 Type B 2 USB 1.1 Type A (50Mbps)
Expansion Port Dante® Option
Interface IR or Keypad via OSD, Webserver
Housing Black Aluminum Enclosure
Dimensions [L x W x H] 175 x 102 x 27.7mm [6.875" x 4" x 1.09"]
Weight .453kg [1lbs]
Mounting Rack mount vertical, Rack mount horizontal, Under table mount (Included)
Power supply 48V DC (2 pin Euro) or PoE (LAN)
Power consumption 9 Watts
Operation temperature 0~40C [32~104F]
Storage temperature -20~60C [-4~140F]
Relative humidity 20~90% RH [no condensation]

Optional Accessories

3.5mm TRS to FEMALE DB9 2-TX 3...
3.5mm TRS to FEMALE DB9 3-TX 2...
3.5mm TRS to MALE DB9 2-TX 3-R...
IR receiver extension cable. Compatible with IPX/VLX, QX and NX series, and V-Tune Pro HD....
3.5mm TRS to MALE DB9 3-TX 2-R...
HDMI 2.0a Cables
HDMI 2.0a 18Gbps Cables in a variety of colors and lengths. Part Number Ordering Matrix:   Red Green Blue Yellow Orange Black 0.5m (1.6') CA-HDMI-RED-0.5 C...
48V 25 Watt Wall Supply Available in -US, -AU, - EU, and -UK worldwide models....
48v DC 24 Watt PoE Gigabit Power Supply Injector Available in 4 models. PS0081-1-US (North America) PS0081-1-EU (Europe) PS0081-1-AU (Australia) PS0081-1-UK (United Kingdom)...
Dual IR Emitter for use with the QX and NX series of control systems....
Single IR Emitter - 12Ft. Length...
IPE-DTE-1 Dante Option Card adds Dante audio to IPX, VLX and DTX Series products....