IPBaseT VLX-TCW2VThe VLX-TCW2V provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one. It is the industry’s first 4K UHD transceiver with only 1.5 frame (25ms) latency and visually lossless compression. The VLX-TCW2V has 1 VGA and 1 HDMI port. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The VLX-TCW2 Series can be set up as either one to make installation, inventory, and troubleshooting easier.

Note: The selected network switch needs to support:  1Gbps, Non-blocking IGMP & Jumbo Frame Packets. The raw network cabling as well as the patch cables are as important as the switch. When using copper, CAT5e, 6, or 6a cable is preferred for optimal performance and is important to follow the standard rules for running Ethernet cables. No sharp bends, coiling, putting near power lines, grouping tightly together with other LAN cables, etc. Shielding is not necessary but can be used for noisy environments.

  • 4K visually lossless over 1Gbps network
  • Low 1.5 frame latency
  • 1080p to 4K, 4K to 1080p scaling
  • HDMI® 2.0/HDCP 2.2
  • Secure Content Encryption
  • Unlimited scalability (based on network topology)
  • Videowall with image rotation
  • PoE (Power over Ethernet)
  • Stereo line I/O
  • RS-232 and IR Control Ports
  • Auto sense switching
  • USB 2.0 Host and Device Ports
  • Dante® IP audio option
Compression 8:1
Latency 1.5 Frames (25ms)
Scaling 1080p to 4K, 4K to 1080p
HDMI Input 1 HDMI 2.0/HDCP2.2
VGA/YPbPr Inputs 1 15 Pin HD Female
HDMI Outputs 1 HDMI 2.0/HDCP2.2
Audio Analog Stereo Line In/Out (3.5mm TRS)
1G Copper Ethernet RJ-45
LAN RJ-45 10/100/1000M PoE (PSE)
Video Bandwidth 340MHz
Video support Up to 4K2K 4:2:0 @60Hz
Audio support Up to 32 channels & Break-away Capable
RS-232 2 qty Up to 115k Baud (3.5mm TRS)
IR Bi-Directional (3.5mm TRS)
USB Connector 1 USB 2.0 Type A, 1 USB 2.0 Type B 2 USB 1.1 Type A
Expansion Port Dante® Option
Interface IR or Keypad via OSD, Webserver
Housing Aluminum
Dimensions [L x W x H] 2 Gang 3.728” x 2.83”(4.331” with tabs) x 1.404”
Weight 1.13g [2.5lbs]
Mounting Wall-mounting Decora® 2 Gang
Power supply 48V DC (2 pin Euro) or 1G PoE
Power consumption 9 Watts
Operation temperature 0~40C [32~104F]
Storage temperature -20~60C [-4~140F]
Relative humidity 20~90% RH [no condensation]

Optional Accessories

IR receiver extension cable. Compatible with IPX/VLX, QX and NX series, and V-Tune Pro HD....
3.5mm TRS to FEMALE DB9 2-TX 3 For RS232 applications with IPX, VLX, DXE, HTE Series Products....
3.5mm TRS to FEMALE DB9 3-TX 2 For RS232 applications with IPX, VLX, DXE, HTE Series Products....
3.5mm TRS to MALE DB9 2-TX 3-R For RS232 applications with IPX, VLX, DXE, HTE Series Products....
3.5mm TRS to MALE DB9 3-TX 2-R For RS232 applications with IPX, VLX, DXE, HTE Series Products....
HDMI 2.0a Cables
HDMI 2.0a 18Gbps Cables in a variety of colors and lengths. Part Number Ordering Matrix:   Red Green Blue Yellow Orange Black 0.5m (1.6') CA-HDMI-RED-0.5 C...
48v DC 24 Watt PoE Gigabit Power Supply Injector Available in 4 models. PS0081-1-US (North America) PS0081-1-EU (Europe) PS0081-1-AU (Australia) PS0081-1-UK (United ...
48V 25 Watt Wall Supply Available in -US, -AU, - EU, and -UK worldwide models....
2 Gang Low Voltage Mounting Bracket...
Dual IR Emitter for use with the QX and NX series of control systems....
Single IR Emitter - 12Ft. Length...
VLX, IPX-TC3 & HT Series 2 Channel Dante™ audio option card.  The IPE-DTE-1 provides a Dante interface for networked audio products requiring up to 2x2 channels at 44.1 kHz,...