VLX: Point-to-Point operation

Last Updated 9 months ago

 

For point-to-point applications, you can set two VLX units to stream without a switch.

File.php

Pre-route via switch, then connect point-to-point:

  • Connect the Encoder, Decoder and Laptop to switch.
  • IP into Decoder, and select remote Tab.
  • Select the Encoder from drop-down, and apply.
  • Once routed, you can now connect point-to-point.

You can also make this route with IPBaseT Manager or by using telnet to decoder IP (Port 6970):

join HDMI vlx-series-enc-2165 display

Originally published 3/5/2019